CORITEC 250i touch 5-axis laboratory milling machine
These systems are therefore ideal if a good price/performance ratio is in the foreground, while simultaneously retaining very high equipment flexibility.
CORITEC 250i Dry & Wet Touch 5-axis dental laboratory milling machine
THE COMPACT 5 AXLE SYSTEM
The CORITEC 250i and CORITEC 250i Dry & Wet are one of the most commonly used CAD / CAM systems for dental laboratories.
With 5 axes, this device is able to make complex dentures with divergent stumps without post-processing.
If you are looking for high performance / flexibility in your machine system but are still interested in value for money, the CORiTEC 250i touch is the perfect solution for you.
The CORiTEC 250i touch also has a wet machining option. Wet processing is mainly done during the processing of CAD / CAM blocks, special plastics, and even with a 7-piece automatic raw material filling system - CORiTEC 250i PRO Loader version.
Technical highlights:
-
5-axis machining system with up to 30° axis orientation
-
No extra rebuild between wet & dry processing necessary (only CORiTEC 250i touch)
-
Tool runtime control/breakage control integrated cooling circuit for cooling lubricant
-
HF spindle up to 60,000 rpm
-
High-resolution and high-performance micro-step controllers and motors on all axes
-
Air purge system and cooling nozzles for wet processing are integrated in the spindle holder
-
Extraction system to extract the resulting particulate matter
-
Automatic compressed air and coolant monitoring
-
For processing of zirconium dioxide, PMMA, wax, plastics, and grindable block materials, prefabricated
-
abutments
-
Control software Remote DENTAL 3.0
-
Touchscreen operation with integrated Tablet-PC
Applications
Technical specifications:
Number of axles and machining type |
5 axes, simultaneous machining |
Max. tilt angle of the rotary axis |
A-axis /- 30° / B-axis /- 25° |
Wet processing |
Integrated for the CORiTEC 250i |
Spindle max. / Pmax~ |
60,000 rpm / 0,4 kW |
Axle drives |
Microstep motors |
Tool fitting |
3 mm shaft |
Tool changer |
12-fold |
Workpiece changer |
Manual |
Weight |
95 kg |
width x depth x height |
544x650x612 mm |
Mains voltage / frequency / power |
100 V-240 V / 50/60 Hz / 900 W |
Compressed air supply |
6-9 bar constant supply, only 50 litres/minute |
Materials |
Zirconium dioxide, aluminium oxide, PMMA, plastics, composites, wax. Glass ceramics, hybrid ceramics. |
Compatibility |
98 mm/98.5 mm blanks, CAD/CAM blocks (3-fold adapters), Lava frames
|